PartsTable
Technical Data Sheet
401-88 ✓ Verified by PartsTable
schleich · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Schleich Western Riding Tack with Male Rider looks at home in the 1800s and even today with his classic look of denim, white shirt, and hat. Get ready to expore the Grand Canyon!. Key specifications include color: BLACK, material: STEEL CASE, tire_type: RUBBER, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-087-5070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
401-88
NSN: 5330-00-087-5070
FSC: 5330
CAGE: 10912 — CARTER RALPH B CO (USA)
SPECIFICATIONS
colorBLACK
materialSTEEL CASE
tire_typeRUBBER
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
thread_length2.0 MILLIMETERS MM
handle_quantity2
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
special_featuresWHEELS 6.000 IN. BY 2.000 IN.; RATCHET MODEL EQUIPPED WITH ONE 3-PLY TWO-PIECE 14 FT WEB STRAP WITH RATCHET STRAP TIGHTENER AND AUTOMATIC STRAP RECOIL IN
housing_bore_diameter3.623 INCHES NOMINAL IN
nominal_overall_width17.000 INCHES IN
NSN5330-00-087-5070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 401-88 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASE STYLE: SQUARE
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
SEAL WIDTH: 0.375 INCHES NOMINAL IN
MATERIAL: STEEL CASE
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
SEAL WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
T-245-MInterchangeable
interchangeable cross-reference
interchangeable
TPS2-8-1BInterchangeable
interchangeable cross-reference
interchangeable
9157088-2Interchangeable
interchangeable cross-reference
interchangeable
GInterchangeable
interchangeable cross-reference
interchangeable
SM9Interchangeable
interchangeable cross-reference
interchangeable
40188Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 401-88?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 401-88?
401-88 is a TERMINAL,LUG manufactured by schleich.
What parts can replace 401-88?
There are 10 known substitutes for 401-88: T-245-M, TPS2-8-1B, 9157088-2 and 7 more. Substitute compatibility should be verified for your specific system.
Is 401-88 still available?
401-88 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 401-88