The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-901-4793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
400WCS3
NSN:5340-00-901-4793 FSC:5340 — Hardware, Commercial CAGE:83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
diameter
0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
RUBBER SILICONE CLASS Q CUSHION
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CADMIUM BAND
material_thickness
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter
0.188 INCHES NOMINAL IN
specification/standard_data
81205-BACC10GE MANUFACTURERS SPECIFICATION
cushioning_environmental_protection
CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classification
AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
0.716 INCHES NOMINAL IN
NSN
5340-00-901-4793
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.716 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION
CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER
0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.716 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA
81205-BACC10GE MANUFACTURERS SPECIFICATION
SURFACE TREATMENT
CADMIUM BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 400WCS3?
400WCS3 is a CLAMP,LOOP.
What parts can replace 400WCS3?
There are 5 known substitutes for 400WCS3: BACC10GE3, S714WH3, BACC10BH3RW and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 400WCS3?
400WCS3 is cataloged in the U.S. Government catalog under NSN 5340-00-901-4793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.