PartsTable
Technical Data Sheet
PartsTable / MRO / 4008-6
4008-6 ✓ Verified by PartsTable
Tactic · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CONTROL ASSEMBLY,PUSH-PULL is a Tactic industrial component. Key specifications include material: STEEL, size_designation: 9 MILLIMETER MM, end_item_identification: 1005-01-660-0803;PISTOL,9 MILLIMETER,SEMI-AUTOMATIC MM, weapon_size_designation: 9 MILLIMETER MM, part_name_assigned_by_controlling_agency: BARREL, G19M. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4008-6
NSN: 3110-00-151-8440
FSC: 3110
CAGE: 73740 — TRW INC TRW COMMERCIAL STEERING DIV (USA)
SPECIFICATIONS
materialSTEEL
size_designation9 MILLIMETER MM
end_item_identification1005-01-660-0803;PISTOL,9 MILLIMETER,SEMI-AUTOMATIC MM
weapon_size_designation9 MILLIMETER MM
part_name_assigned_by_controlling_agencyBARREL, G19M
NSN3110-00-151-8440
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4008-6 · Tactic ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BACKFACE CORNER RADIUS: 0.1200 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.7500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BACKFACE CORNER RADIUS0.1200 INCHES NOMINAL IN
OVERALL WIDTH0.9200 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SPECIAL FEATURESID LAND 1.9800; KEYWAY ON OD 0.1870 IN. W 0.2140 IN. DEEP FORMED WITH A 0.8800 IN. RADIUS IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7023070Interchangeable
interchangeable cross-reference
interchangeable
45134Interchangeable
interchangeable cross-reference
interchangeable
2590005135783Interchangeable
interchangeable cross-reference
interchangeable
40086Interchangeable
interchangeable cross-reference
interchangeable
7329022Interchangeable
interchangeable cross-reference
interchangeable
5200-403Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4008-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4008-6?
4008-6 is a CONTROL ASSEMBLY,PUSH-PULL manufactured by Tactic. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4008-6?
There are 13 known substitutes for 4008-6: 7023070, 45134, 2590005135783 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4008-6?
4008-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8440. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4008-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026