PartsTable
Technical Data Sheet
Download PDF

40065562 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

40065562: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC, special_features: MATT = ETHYLENE PROPYLENE, center_hole_diameter: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN, cross-sectional_height: 0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, part_name_assigned_by_controlling_agency: SQUARE SEAL SIZE AS-568A-229 A. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-597-4782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40065562
NSN: 5331-01-597-4782
FSC: 5331 — O-ring
CAGE: KCUC6 — MINISTRY OF DEFENCE, FUTURE AIRCRAFT CARRIER IPT (CVF IPT) (GBR)
SPECIFICATIONS
materialPLASTIC
special_featuresMATT = ETHYLENE PROPYLENE
center_hole_diameter2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
cross-sectional_height0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencySQUARE SEAL SIZE AS-568A-229 A
NSN5331-01-597-4782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40065562 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.130 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
SPECIAL FEATURESMATT = ETHYLENE PROPYLENE
CENTER HOLE DIAMETER2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSQUARE SEAL SIZE AS-568A-229 A
MATERIALPLASTIC
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
6110229-NReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 40065562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40065562?
40065562 is a O-RING.
What parts can replace 40065562?
There is 1 known substitute for 40065562: 6110229-N. Substitute compatibility should be verified for your specific system.
What is the NSN for 40065562?
40065562 is cataloged in the U.S. Government catalog under NSN 5331-01-597-4782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40065562