PartsTable
Technical Data Sheet
Download PDF

400594-2 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

400594-2: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN, electrical_resistance: 0.100 OHMS, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, resistance_tolerance_in_percent: -1.000 TO 1.000, power_dissipation_rating_in_watts: 10.000 FREE AIR. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-541-2123, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 400594-2
NSN: 5331-00-541-2123
NIINs: 005412123, 010545360
FSC: 5331 — O-ring
CAGE: 79948 — LTV STEEL CO INC (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
electrical_resistance0.100 OHMS
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
resistance_tolerance_in_percent-1.000 TO 1.000
power_dissipation_rating_in_watts10.000 FREE AIR
NSN5331-00-541-2123
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 400594-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 2
7515598P2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
400595Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 400594-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 400594-2?
400594-2 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 400594-2?
There are 2 known substitutes for 400594-2: 7515598P2, 400595. Substitute compatibility should be verified for your specific system.
What is the NSN for 400594-2?
400594-2 is cataloged in the U.S. Government catalog under NSN 5331-00-541-2123. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 400594-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.