PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4003360-7
4003360-7 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.281 INCHES NOMINAL IN, point_style: CONE, point_length: 0.391 INCHES NOMINAL IN, thread_class: 3A A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-514-8430, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4003360-7
NSN: 5305-00-514-8430
FSC: 5305
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.281 INCHES NOMINAL IN
point_styleCONE
point_length0.391 INCHES NOMINAL IN
thread_class3A A
thread_length0.380 INCHES MINIMUM IN
point_diameter0.285 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
fastener_length0.864 INCHES NOMINAL IN
thread_directionRIGHT-HAND
point_chamfer_angle90.0 DEGREES NOMINAL
width_between_flats0.562 INCHES NOMINAL IN
NSN5305-00-514-8430
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4003360-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 16
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
WIDTH BETWEEN FLATS: 0.562 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: W/O INTERNAL DRIVE
•
POINT CHAMFER ANGLE: 90.0 DEGREES NOMINAL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
WIDTH BETWEEN FLATS0.562 INCHES NOMINAL IN
INTERNAL DRIVE STYLEW/O INTERNAL DRIVE
POINT CHAMFER ANGLE90.0 DEGREES NOMINAL
THREAD DIRECTIONRIGHT-HAND
POINT STYLECONE
FASTENER LENGTH0.864 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
5026CInterchangeable
interchangeable cross-reference
interchangeable
10144Interchangeable
interchangeable cross-reference
interchangeable
MA1591Interchangeable
interchangeable cross-reference
interchangeable
33-60Interchangeable
interchangeable cross-reference
interchangeable
A-A-52490Interchangeable
interchangeable cross-reference
interchangeable
5L360-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4003360-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4003360-7?
4003360-7 is a SETSCREW.
What parts can replace 4003360-7?
There are 19 known substitutes for 4003360-7: 5026C, 10144, MA1591 and 16 more. Substitute compatibility should be verified for your specific system.
Is 4003360-7 still available?
4003360-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4003360-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026