PartsTable
Technical Data Sheet
Download PDF

4003001 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

4003001: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 6.5000 INCHES NOMINAL IN, contact_angle: 30.0 DEGREES NOMINAL, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-168-6319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4003001
NSN: 3110-00-168-6319
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter6.5000 INCHES NOMINAL IN
contact_angle30.0 DEGREES NOMINAL
overall_width0.5000 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance0.0020 INCHES MINIMUM RADIAL AND 0.0034 INCHES MAXIMUM RADIAL IN
overall_outside_diameter7.5000 INCHES NOMINAL IN
retainer_fabrication_methodWIRE FORMED
standard_tolerance_designationABEC NO.1
NSN3110-00-168-6319
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4003001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: WIRE FORMED
•
INTERNAL CLEARANCE: 0.0020 INCHES MINIMUM RADIAL AND 0.0034 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 7.5000 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 30.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODWIRE FORMED
INTERNAL CLEARANCE0.0020 INCHES MINIMUM RADIAL AND 0.0034 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER7.5000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
CONTACT ANGLE30.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
KD65AWB4003-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 4003001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4003001?
4003001 is a BEARING,BALL,ANNULAR.
What parts can replace 4003001?
There is 1 known substitute for 4003001: KD65AWB4003-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 4003001?
4003001 is cataloged in the U.S. Government catalog under NSN 3110-00-168-6319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4003001