PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4002692-4
4002692-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 30.0 DEGREES NOMINAL, material: COPPER ALLOY OVERALL, surface_treatment: CADMIUM OVERALL, peripheral_diameter: 1.688 INCHES NOMINAL IN, center_hole_diameter: 0.896 INCHES MINIMUM AND 0.901 INCHES MAXIMUM IN, cross-sectional_height: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-6613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4002692-4
NSN: 5330-00-171-6613
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
angle30.0 DEGREES NOMINAL
materialCOPPER ALLOY OVERALL
surface_treatmentCADMIUM OVERALL
peripheral_diameter1.688 INCHES NOMINAL IN
center_hole_diameter0.896 INCHES MINIMUM AND 0.901 INCHES MAXIMUM IN
cross-sectional_height0.500 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
flanged_body_outside_diameter1.391 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN
NSN5330-00-171-6613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4002692-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.688 INCHES NOMINAL IN
•
ANGLE: 30.0 DEGREES NOMINAL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
FLANGED BODY OUTSIDE DIAMETER: 1.391 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
CENTER HOLE DIAMETER: 0.896 INCHES MINIMUM AND 0.901 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.688 INCHES NOMINAL IN
ANGLE30.0 DEGREES NOMINAL
SURFACE TREATMENTCADMIUM OVERALL
FLANGED BODY OUTSIDE DIAMETER1.391 INCHES MINIMUM AND 1.396 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
CENTER HOLE DIAMETER0.896 INCHES MINIMUM AND 0.901 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
465Interchangeable
interchangeable cross-reference
interchangeable
2692Interchangeable
interchangeable cross-reference
interchangeable
4002692Interchangeable
interchangeable cross-reference
interchangeable
134204-0006Interchangeable
interchangeable cross-reference
interchangeable
3954-63AInterchangeable
interchangeable cross-reference
interchangeable
134204-006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4002692-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4002692-4?
4002692-4 is a RETAINER,PACKING.
What parts can replace 4002692-4?
There are 13 known substitutes for 4002692-4: 465, 2692, 4002692 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4002692-4?
4002692-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-6613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4002692-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026