PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4001508
4001508 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.875 INCHES NOMINAL IN, aperture_width: 1.812 INCHES NOMINAL IN, overall_length: 4.484 INCHES NOMINAL IN, aperture_length: 3.422 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-569-0662, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4001508
NSN: 5330-00-569-0662
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.875 INCHES NOMINAL IN
aperture_width1.812 INCHES NOMINAL IN
overall_length4.484 INCHES NOMINAL IN
aperture_length3.422 INCHES NOMINAL IN
cross-sectional_thickness0.005 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.312 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.312 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length1.609 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-569-0662
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4001508 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 3.422 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.609 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE WIDTH: 1.812 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE LENGTH3.422 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.609 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH2.875 INCHES NOMINAL IN
APERTURE WIDTH1.812 INCHES NOMINAL IN
MATERIALPAPER OVERALL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.312 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.312 INCHES NOMINAL IN
OVERALL LENGTH4.484 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
5878Interchangeable
interchangeable cross-reference
interchangeable
06353ABInterchangeable
interchangeable cross-reference
interchangeable
50005Interchangeable
interchangeable cross-reference
interchangeable
8683Interchangeable
interchangeable cross-reference
interchangeable
024100400Interchangeable
interchangeable cross-reference
interchangeable
VX87Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4001508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4001508?
4001508 is a GASKET.
What parts can replace 4001508?
There are 20 known substitutes for 4001508: 5878, 06353AB, 50005 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4001508?
4001508 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-569-0662. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4001508

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026