PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4001353-4
4001353-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS OVERALL, hole_diameter: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, bolt_circle_diameter: 4.500 INCHES NOMINAL IN, outside_corner_radius: 0.469 INCHES NOMINAL IN, cross-sectional_thickness: 0.047 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-365-9737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4001353-4
NSN: 5330-00-365-9737
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
hole_diameter0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
bolt_circle_diameter4.500 INCHES NOMINAL IN
outside_corner_radius0.469 INCHES NOMINAL IN
cross-sectional_thickness0.047 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationFS191,FSCM 79150 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-365-9737
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4001353-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.469 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FS191,FSCM 79150 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.047 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 4.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.469 INCHES NOMINAL IN
MATERIALASBESTOS OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFS191,FSCM 79150 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.047 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.500 INCHES NOMINAL IN
HOLE DIAMETER0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
60204Interchangeable
interchangeable cross-reference
interchangeable
3H1911-3S7Interchangeable
interchangeable cross-reference
interchangeable
11055AInterchangeable
interchangeable cross-reference
interchangeable
D50CLInterchangeable
interchangeable cross-reference
interchangeable
032806Interchangeable
interchangeable cross-reference
interchangeable
BAC1503-449Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4001353-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4001353-4?
4001353-4 is a GASKET.
What parts can replace 4001353-4?
There are 14 known substitutes for 4001353-4: 60204, 3H1911-3S7, 11055A and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4001353-4?
4001353-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-365-9737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4001353-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026