PartsTable / COMPONENT / 4001125
4001125
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.067 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-331-6256, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
4001125
NSN: 5340-00-331-6256 FSC: 5340 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_style HEXAGON head_height 0.067 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN thread_class 2A A thread_length 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN screw_material STEEL fastener_length 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN thread_direction RIGHT-HAND width_between_flats 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN nominal_thread_diameter 0.138 INCHES IN screw_surface_treatment CADMIUM thread_quantity_per_inch 32 thread_series_designator UNIFIED NATIONAL COARSE (UNC) NSN 5340-00-331-6256
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 4001125
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HEIGHT: 0.156 INCHES NOMINAL IN
• MATERIAL: STEEL CORROSION RESISTING
• EFFECTIVE HEIGHT: 0.125 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 0.083 INCHES NOMINAL IN
• HOLE DIAMETER: 0.112 INCHES NOMINAL IN
• STYLE DESIGNATOR: ROUND OR ROUND W/ONE FLAT SIDE
• SHANK DIAMETER: 0.132 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT 0.156 INCHES NOMINAL IN MATERIAL STEEL CORROSION RESISTING EFFECTIVE HEIGHT 0.125 INCHES NOMINAL IN OUTSIDE DIAMETER 0.083 INCHES NOMINAL IN HOLE DIAMETER 0.112 INCHES NOMINAL IN STYLE DESIGNATOR ROUND OR ROUND W/ONE FLAT SIDE SHANK DIAMETER 0.132 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
24254 Upgraded Successor successor cross-reference
successor
14125A Interchangeable interchangeable cross-reference
interchangeable
BT14125A Interchangeable interchangeable cross-reference
interchangeable
5837 Interchangeable interchangeable cross-reference
interchangeable
4001125 Interchangeable interchangeable cross-reference
interchangeable
AS24254 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 4001125?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4001125?
4001125 is a SCREW,MACHINE.
What parts can replace 4001125?
There are 22 known substitutes for 4001125: 24254, 14125A, BT14125A and 19 more. Substitute compatibility should be verified for your specific system.
Is 4001125 still available?
4001125 is currently cancelled.
Request a Quote — 4001125