4001-025 — 4001-025

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

4001-025: 4001-025.

The 4001-025 is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, part_name_assigned_by_controlling_agency: CHEEK RETRACTOR. This part is cataloged in the U.S.

Government catalog under NSN 9540-01-315-3612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

4001-025

NSN: 9540-01-315-3612
NIINs: 013153612, 015819706
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 97499 — BELL TEXTRON INC (USA)

SPECIFICATIONS

material	PLASTIC OVERALL
special_features	FOR INTRAORAL PHOTOGRAPHY; BREAK RESISTANT; CRYSTAL CLEAR; AUTOCLAVABLE TO 270 DEG F; GIVES OPERATOR FULL VIEW OF ANTERIOR AND POSTERIOR TEETH DEGF
part_name_assigned_by_controlling_agency	CHEEK RETRACTOR
NSN	9540-01-315-3612

COMPONENT DIAGRAM

KEY FEATURES

•

RIGHT SIDE TOP FLANGE THICKNESS: 0.050 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES: 0.975 INCHES NOMINAL IN

•

RIGHT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

•

LEFT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

•

HEAT TREATMENT: T-4 SOLUTION HEAT TREATED OR T-3510 SOLUTION HEAT TREATED OR T-3511 SOLUTION HEAT TREATED

•

FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG: 0.062 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	2.250 INCHES NOMINAL IN
RIGHT SIDE TOP FLANGE THICKNESS	0.050 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.975 INCHES NOMINAL IN
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
HEAT TREATMENT	T-4 SOLUTION HEAT TREATED OR T-3510 SOLUTION HEAT TREATED OR T-3511 SOLUTION HEAT TREATED
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.062 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

60-20285Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 4001-025?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 4001-025?

4001-025 is a 4001-025.

What parts can replace 4001-025?

There are 3 known substitutes for 4001-025: 60-20285, AMS-QQ-A-200/3, QQ-A-200/3. Substitute compatibility should be verified for your specific system.

What is the NSN for 4001-025?

4001-025 is cataloged in the U.S. Government catalog under NSN 9540-01-315-3612. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

4001-025 — 4001-025

Request a Quote — 4001-025