PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4000836-2
4000836-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,INSTRUMENT MOUNTING is a the manufacturer industrial component. Key specifications include width: 4.250 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 AND COPPER ALLOY, material_document_and_classification: QQ-A-200/8 FED SPEC ALL MATERIAL RESPONSES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-031-0722, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4000836-2
NSN: 5340-01-031-0722
FSC: 5340
CAGE: 07187 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL (USA)
SPECIFICATIONS
width4.250 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 AND COPPER ALLOY
material_document_and_classificationQQ-A-200/8 FED SPEC ALL MATERIAL RESPONSES
NSN5340-01-031-0722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4000836-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 AND COPPER ALLOY
•
WIDTH: 4.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/8 FED SPEC ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 AND COPPER ALLOY
WIDTH4.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/8 FED SPEC ALL MATERIAL RESPONSES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2110-0312Interchangeable
interchangeable cross-reference
interchangeable
313001Interchangeable
interchangeable cross-reference
interchangeable
F02B250V1AInterchangeable
interchangeable cross-reference
interchangeable
45 DEG,3/4 NPT,Interchangeable
interchangeable cross-reference
interchangeable
54-622Interchangeable
interchangeable cross-reference
interchangeable
66-613Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4000836-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4000836-2?
4000836-2 is a CLAMP,INSTRUMENT MOUNTING.
What parts can replace 4000836-2?
There are 7 known substitutes for 4000836-2: 2110-0312, 313001, F02B250V1A and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4000836-2?
4000836-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-031-0722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4000836-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026