PartsTable
Technical Data Sheet
Download PDF

40005D4HW — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

40005D4HW: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include end_item_identification: RADAR CABLES AND HARNESSES, part_name_assigned_by_controlling_agency: CLAMP,LOOP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-695-3836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40005D4HW
NSN: 5340-01-695-3836
FSC: 5340 — Hardware, Commercial
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
end_item_identificationRADAR CABLES AND HARNESSES
part_name_assigned_by_controlling_agencyCLAMP,LOOP
NSN5340-01-695-3836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40005D4HW MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,LOOP
END ITEM IDENTIFICATIONRADAR CABLES AND HARNESSES
SUBSTITUTES & CROSS-REFERENCES 3
9NG0012Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
9NG0012D4HRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA0220055DC4HRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 40005D4HW?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40005D4HW?
40005D4HW is a CLAMP,LOOP.
What parts can replace 40005D4HW?
There are 3 known substitutes for 40005D4HW: 9NG0012, 9NG0012D4HR, TA0220055DC4HR. Substitute compatibility should be verified for your specific system.
What is the NSN for 40005D4HW?
40005D4HW is cataloged in the U.S. Government catalog under NSN 5340-01-695-3836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40005D4HW