PartsTable
Technical Data Sheet
Download PDF

4000414009 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4000414009: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES NOMINAL IN, fastener_length: 4.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-658-1014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4000414009
NSN: 5305-01-658-1014
FSC: 5305 — Screws
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES NOMINAL IN
fastener_length4.000 INCHES NOMINAL IN
special_featuresMATERIAL GRADE 8
thread_directionRIGHT-HAND
width_between_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
end_item_identification3930-01-641-7505
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
NSN5305-01-658-1014
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4000414009 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
FASTENER LENGTH4.000 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
SPECIAL FEATURESMATERIAL GRADE 8
PART NAME ASSIGNED BY CONTROLLING AGENCYSCR, CAP, HEX TAB G8
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
4000414Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4000414009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4000414009?
4000414009 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 4000414009?
There is 1 known substitute for 4000414009: 4000414. Substitute compatibility should be verified for your specific system.
What is the NSN for 4000414009?
4000414009 is cataloged in the U.S. Government catalog under NSN 5305-01-658-1014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4000414009

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.