PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4000234-1
4000234-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.112 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.250 INCHES NOMINAL IN, special_features: ONE TONGUE HOLE ELONGATED, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-237-6735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4000234-1
NSN: 5340-00-237-6735
FSC: 5340
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
diameter0.112 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.250 INCHES NOMINAL IN
special_featuresONE TONGUE HOLE ELONGATED
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.025 INCHES NOMINAL IN
NSN5340-00-237-6735
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4000234-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
DIAMETER: 0.112 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
DIAMETER0.112 INCHES NOMINAL IN
SPECIAL FEATURESONE TONGUE HOLE ELONGATED
OVERALL WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
6801-1302-001Interchangeable
interchangeable cross-reference
interchangeable
1073Interchangeable
interchangeable cross-reference
interchangeable
2398871Interchangeable
interchangeable cross-reference
interchangeable
72-6971-301Interchangeable
interchangeable cross-reference
interchangeable
127704Interchangeable
interchangeable cross-reference
interchangeable
N01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4000234-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4000234-1?
4000234-1 is a CLAMP,LOOP.
What parts can replace 4000234-1?
There are 12 known substitutes for 4000234-1: 6801-1302-001, 1073, 2398871 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4000234-1?
4000234-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-237-6735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4000234-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026