PartsTable
Technical Data Sheet
PartsTable / MRO / 4000-10
4000-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.755 INCHES NOMINAL IN, cross-sectional_height: 0.097 INCHES NOMINAL IN, end_item_identification: 3815-01-597-5671, part_name_assigned_by_controlling_agency: 10 BUNA O-RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-071-6550, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4000-10
NSN: 3110-00-071-6550
FSC: 3110
CAGE: 52827 — BUS BOY DISPOSERS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.755 INCHES NOMINAL IN
cross-sectional_height0.097 INCHES NOMINAL IN
end_item_identification3815-01-597-5671
part_name_assigned_by_controlling_agency10 BUNA O-RING
NSN3110-00-071-6550
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4000-10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
SURFACE FINISH: GROUND
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONLOOSE
SURFACE FINISHGROUND
MATERIALRUBBER SYNTHETIC SEAL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH17.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
5012-T 2-2Interchangeable
interchangeable cross-reference
interchangeable
111490Interchangeable
interchangeable cross-reference
interchangeable
4000-10Interchangeable
interchangeable cross-reference
interchangeable
8546652-11Interchangeable
interchangeable cross-reference
interchangeable
332548Interchangeable
interchangeable cross-reference
interchangeable
7905292-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4000-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4000-10?
4000-10 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4000-10?
There are 17 known substitutes for 4000-10: 5012-T 2-2, 111490, 4000-10 and 14 more. Substitute compatibility should be verified for your specific system.
Is 4000-10 still available?
4000-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4000-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026