PartsTable
Technical Data Sheet
40-621 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

USB Port Blockers are useful little devices that system administrators can use to physically prevent access to USB ports. USB Port Blockers allow locks to be inserted and removed from USB ports to stop unauthorised users from inserting pen drives, USB mass storage and mobile devices into shared workstations or devices with USB ports in public spaces.<br><br>To use, simply attach a lock to the key and insert it into the USB port. Release the sliding mechanism on the key to leave the lock in place.<br><br>To remove, simply insert the key back into the lock and pull away.<br><br>Please note: this key is only compatible with the corresponding colour of port blocker This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-042-8778, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 40-621
NSN: 5998-00-042-8778
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 26344 — NEW HAVEN MFG CORP (USA)
SPECIFICATIONS
capacity6.0 GALLONS TANK
materialSTEEL CORROSION RESISTING
overall_depth19.125 INCHES NOMINAL IN
overall_width13.625 INCHES NOMINAL IN
overall_height13.625 INCHES NOMINAL IN
overall_length20.000 INCHES NOMINAL IN
special_featuresTIG WELDED ALUMINUM TANK WITH STAINLESS COVER, BUILT-IN FRONT HEAT EXCHANGER, IGNITION PROTECTION, PRESSURE RELIEF VALVE, DRAIN, FRONT/BACK MOUNTING TABS; 240 VOLT L1 AND L2 WATER HEATER
part_name_assigned_by_controlling_agencyROLL CHEST FLAT BOTTOMED UPPER BODY POSITIONING 20IN X 6IN IN
NSN5998-00-042-8778
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 40-621 MFR Lindy CONNECTOR,PLUG,ELECTRICAL
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYP. C. BOARD NO. 1 COMPONENT ASSEMBLY REGULATED POWER SUPPLY
PART NAME ASSIGNED BY CONTROLLING AGENCYP. C. BOARD NO. 1 COMPONENT ASSEMBLY REGULATED POWER SUPPLY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
40-621Interchangeable
interchangeable cross-reference
interchangeable
6695PL0826086Interchangeable
interchangeable cross-reference
interchangeable
5935PL0917564Interchangeable
interchangeable cross-reference
interchangeable
8818300077-3Interchangeable
interchangeable cross-reference
interchangeable
C41SWInterchangeable
interchangeable cross-reference
interchangeable
S9300-921868PC25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 40-621?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40-621?
40-621 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 40-621?
There are 21 known substitutes for 40-621: 40-621, 6695PL0826086, 5935PL0917564 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40-621?
40-621 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-042-8778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40-621