PartsTable
Technical Data Sheet
Download PDF

40-40 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

40-40: CONNECTOR,PLUG,ELECTRICAL.

- With special suction cup for smooth surfaces - For cameras of up to 1.7 kg, 25 x 14 x 7 cm - With B 1/4" camera thread. Key specifications include method_of_analysis: CHROMATOGRAPHIC AND FLAME PHOTOMETRIC, part_name_assigned_by_controlling_agency: METHANE/NON-METHANE ANALYZER FOR AMBIENT AND PROCESS APPLICATIONS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-087-2296, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 40-40
NSN: 5330-00-087-2296
NIINs: 000872296, 000970425, 001893197, 002252736, 002594811, 002717325, 003327560, 004060021, 006311937, 006654692, 007354063, 007553773, 008110679, 009846221, 010234647, 010360399, 010926620, 011443316, 011465898, 012752769, 013507889, 013687138, 014158061, 014787715, 014862087, 015011820, 015129267, 015154776, 016507634
FSC: 5330 — Packing and Gasket Materials
CAGE: 91251 — FREUDENBERG-NOK GENERAL PARTNERSHIP DBA FREDENBERG-NOK SEALS DIVISION (USA)
SPECIFICATIONS
method_of_analysisCHROMATOGRAPHIC AND FLAME PHOTOMETRIC
part_name_assigned_by_controlling_agencyMETHANE/NON-METHANE ANALYZER FOR AMBIENT AND PROCESS APPLICATIONS
NSN5330-00-087-2296
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40-40 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.563 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2140 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.234 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.563 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2140 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 8
02423158300Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-300-138-03Reference document
Same NSN cross-reference
Reference document — Secondary reference
30-508672Reference document
Same NSN cross-reference
Reference document — Secondary reference
542664Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-300-138Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-300-138-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 40-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40-40?
40-40 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 40-40?
There are 8 known substitutes for 40-40: 02423158300, 2-300-138-03, 30-508672 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40-40?
40-40 is cataloged in the U.S. Government catalog under NSN 5330-00-087-2296. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40-40

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.