Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.500 INCHES NOMINAL IN, aperture_width: 4.188 INCHES NOMINAL IN, overall_length: 17.750 INCHES NOMINAL IN, aperture_length: 16.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-159-3266, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
40-204-1
NSN:5330-00-159-3266 FSC:5330 CAGE:14058 — THE DEWEY ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter
0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
5.500 INCHES NOMINAL IN
aperture_width
4.188 INCHES NOMINAL IN
overall_length
17.750 INCHES NOMINAL IN
aperture_length
16.438 INCHES NOMINAL IN
hardness_rating
55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
special_features
FEED COVER LATCH, COMPONENT OF THE MK 47 MOD 0 FEED COVER ASSEMBLY P/N: 402007.
style_designator
NON-CIRCULAR
bolt_hole_quantity
14
cross-sectional_thickness
0.062 INCHES NOMINAL IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
NSN
5330-00-159-3266
COMPONENT DIAGRAM
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 1.781 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.547 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 16.438 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH
17.750 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
1.781 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
3.547 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
HOLE DIAMETER
0.234 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE LENGTH
16.438 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.062 INCHES NOMINAL IN
STYLE DESIGNATOR
NON-CIRCULAR
APERTURE WIDTH
4.188 INCHES NOMINAL IN
SPECIAL FEATURES
0.281 IN. FROM EDGE OF GASKET TO CENTER OF BOLT HOLES IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40-204-1?
40-204-1 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 40-204-1?
There are 3 known substitutes for 40-204-1: 1-905-1, PC200F, 402041. Substitute compatibility should be verified for your specific system.
What is the NSN for 40-204-1?
40-204-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-159-3266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.