PartsTable / COMPONENT / 40-136
40-136
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CONNECTOR,BULKHEAD,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, case_style: SQUARE, seal_width: 0.605 INCHES NOMINAL IN, temp_rating: -30.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hole_diameter: 0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 1.720 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-083-0349, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
40-136
NSN: 5330-00-083-0349 FSC: 5330 CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
material STEEL OVERALL case_style SQUARE seal_width 0.605 INCHES NOMINAL IN temp_rating -30.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF hole_diameter 0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN overall_length 1.720 INCHES NOMINAL IN capacity_rating 100.0 OUNCES OZ drive_end_shape SQUARE SINGLE END INTERNAL outside_diameter 5.759 INCHES NOMINAL IN special_features COLOR DESERT CAMO; TYPE S GMA; OMEGA RESERVOIR style_designator INTERNAL-INTERNAL aperture_diameter 1.375 INCHES NOMINAL IN NSN 5330-00-083-0349
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 40-136
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
• APERTURE DIAMETER: 1.375 INCHES NOMINAL IN
• MATERIAL: ALUMINUM ALLOY 6061 OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-327,TEMPER T6,6061 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
• SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.077 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
• SURFACE TREATMENT: ANODIZE OVERALL
• HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE METAL AND SYNTHETIC RUBBER APERTURE DIAMETER 1.375 INCHES NOMINAL IN MATERIAL ALUMINUM ALLOY 6061 OVERALL MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-327,TEMPER T6,6061 ASSN STD SINGLE MATERIAL RESPONSE OVERALL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL CROSS-SECTIONAL THICKNESS 0.077 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN SURFACE TREATMENT ANODIZE OVERALL HOLE DIAMETER 0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 0.879 INCHES MINIMUM AND 0.889 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 1.768 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
256853 Interchangeable interchangeable cross-reference
interchangeable
853386 Interchangeable interchangeable cross-reference
interchangeable
40136 Interchangeable interchangeable cross-reference
interchangeable
2304-0136 Interchangeable interchangeable cross-reference
interchangeable
370036A Interchangeable interchangeable cross-reference
interchangeable
14212 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 40-136?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40-136?
40-136 is a CONNECTOR,BULKHEAD,ELECTRICAL.
What parts can replace 40-136?
There are 15 known substitutes for 40-136: 256853, 853386, 40136 and 12 more. Substitute compatibility should be verified for your specific system.
Is 40-136 still available?
40-136 is currently cancelled.