40-068-1 — GEAR SET,BEVEL,MATCHED

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

40-068-1: GEAR SET,BEVEL,MATCHED.

The GEAR SET,BEVEL,MATCHED is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, vent_hole_shape: ROUND, special_features: NEXT HIGHER ASSEMBLY, PART NUMBER 200087, refinement_device_type: WIRE FABRIC, refinement_medium_type: STRAINING, end_item_identification: ELECTRICAL CABINET. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-111-7573, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 40-068-1

NSN: 9540-00-111-7573
NIINs: 001117573, 001383489, 010280388, 014884779, 014954041
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 97499 — BELL TEXTRON INC (USA)

SPECIFICATIONS

material	COPPER ALLOY
vent_hole_shape	ROUND
special_features	NEXT HIGHER ASSEMBLY, PART NUMBER 200087
vent_hole_quantity	3
refinement_device_type	WIRE FABRIC
refinement_medium_type	STRAINING
end_item_identification	ELECTRICAL CABINET
NSN	9540-00-111-7573

COMPONENT DIAGRAM

KEY FEATURES

•

RIGHT SIDE BOTTOM FLANGE THICKNESS: 0.062 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

WEB FLANGE THICKNESS: 0.062 INCHES NOMINAL IN

•

LEFT TOP INSIDE ANGLE: 90.0 DEGREES NOMINAL

•

HEAT TREATMENT: T-3511 SOLUTION HEAT TREATED

•

FIRST TIP RADIUS: 0.062 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.312 INCHES NOMINAL IN
RIGHT SIDE BOTTOM FLANGE THICKNESS	0.062 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
WEB FLANGE THICKNESS	0.062 INCHES NOMINAL IN
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATED
FIRST TIP RADIUS	0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.062 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

AMS-QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Secondary reference

29794Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 40-068-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 40-068-1?

40-068-1 is a GEAR SET,BEVEL,MATCHED. It is classified as a MRO (MRO_GENERAL).

What parts can replace 40-068-1?

There are 3 known substitutes for 40-068-1: AMS-QQ-A-200/3, QQ-A-200/3, 29794. Substitute compatibility should be verified for your specific system.

What is the NSN for 40-068-1?

40-068-1 is cataloged in the U.S. Government catalog under NSN 9540-00-111-7573. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

40-068-1 — GEAR SET,BEVEL,MATCHED

Request a Quote — 40-068-1