PartsTable
Technical Data Sheet
Download PDF

40-0001719 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

40-0001719: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON LOCKING INSERT, nut_style: HEXAGON, nut_height: 0.344 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-630-3566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40-0001719
NSN: 5310-00-630-3566
FSC: 5310 — Nuts and Washers
CAGE: 28265 — HERCULES ENGINE CO INC (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON LOCKING INSERT
nut_styleHEXAGON
nut_height0.344 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
width_across_flats0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch18
NSN5310-00-630-3566
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 40-0001719 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 0.344 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
THREAD SERIESUNF
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.344 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH18
SUBSTITUTES & CROSS-REFERENCES 2
40-0001719AReference document
Same NSN cross-reference
Reference document — Secondary reference
29NTE098Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 40-0001719?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40-0001719?
40-0001719 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 40-0001719?
There are 2 known substitutes for 40-0001719: 40-0001719A, 29NTE098. Substitute compatibility should be verified for your specific system.
What is the NSN for 40-0001719?
40-0001719 is cataloged in the U.S. Government catalog under NSN 5310-00-630-3566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40-0001719