PartsTable
Technical Data Sheet
PartsTable / O-RING / 4-B8076F-ITEM 6
4-B8076F-ITEM 6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, center_hole_diameter: 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-9916, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-B8076F-ITEM 6
NSN: 5331-00-171-9916
FSC: 5331 — O-RING
CAGE: 27477 — MCC HOLDINGS, INC. DBA CRANE VALVE NORTH AMERICA USE CAGE CODE 59309 FOR CATALOGING (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
center_hole_diameter1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-171-9916
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4-B8076F-ITEM 6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
ELONGATION PERCENTAGE160 MAXIMUM
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
P5516ACLASSAInterchangeable
interchangeable cross-reference
interchangeable
MILP5516CLASSAInterchangeable
interchangeable cross-reference
interchangeable
81322Interchangeable
interchangeable cross-reference
interchangeable
1281-3018Interchangeable
interchangeable cross-reference
interchangeable
H57324PC30Interchangeable
interchangeable cross-reference
interchangeable
D8523841REVAPC42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4-B8076F-ITEM 6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-B8076F-ITEM 6?
4-B8076F-ITEM 6 is a O-RING.
What parts can replace 4-B8076F-ITEM 6?
There are 25 known substitutes for 4-B8076F-ITEM 6: P5516ACLASSA, MILP5516CLASSA, 81322 and 22 more. Substitute compatibility should be verified for your specific system.
Is 4-B8076F-ITEM 6 still available?
4-B8076F-ITEM 6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-B8076F-ITEM 6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026