PartsTable
Technical Data Sheet
4-8107 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Cat.6 U/UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.<br>Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification.

The cables are packaged individually in a polybag.<br>The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.<br>Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.<br>Available colours: Blue, Red, Green, Yellow, Black, White, Orange, Purple, Grey. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-2753, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
4-8107
NSN: 5330-00-361-2753
FSC: 5330
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
design_typeFORWARD READING AND SIDE READING
holder_colorGRAY/GREY
adjustment_typeMANUAL
attachment_typeMOVABLE LINE GUIDE AND MOVING READING PLATE
structural_formCOLLAPSIBLE
mechanical_adjustment_typeFLAT READING PLATE
NSN5330-00-361-2753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4-8107 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
MATERIAL: WOOL OVERALL
CROSS-SECTIONAL WIDTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIALWOOL OVERALL
CROSS-SECTIONAL WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
4-8107Interchangeable
interchangeable cross-reference
interchangeable
31521Interchangeable
interchangeable cross-reference
interchangeable
2-1525Interchangeable
interchangeable cross-reference
interchangeable
14448AInterchangeable
interchangeable cross-reference
interchangeable
14485-D PIECE 22Interchangeable
interchangeable cross-reference
interchangeable
2917WInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4-8107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-8107?
4-8107 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Lindy.
What parts can replace 4-8107?
There are 6 known substitutes for 4-8107: 4-8107, 31521, 2-1525 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4-8107?
4-8107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-361-2753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-8107