PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4-7-119
4-7-119 ✓ Verified by PartsTable
Verbatim · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

<b>Features:</b><br>-High performance: 2MB/s transfer rate (typical). <br>-Write protect switch prevents accidental data deletion. <br>-Fully compliant with all applicable Secure Digital standards.

<br>-Lifetime Warranty. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3627, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-7-119
NSN: 3110-00-100-3627
FSC: 3110
CAGE: 78880 — FLXIBLE CO THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
spout_typeFIXED
pouring_lipINCLUDED
load_capacity1.000 CUPS MAXIMUM AND 0.500 CUPS MAXIMUM AND 0.333 CUPS MAXIMUM AND 0.250 CUPS MAXIMUM
overall_length77.7 MILLIMETERS NOMINAL MM
drive_end_shapeSQUARE SINGLE END INTERNAL
special_features4-PIECE MEASURING CUP SET; 1 CUP (240ML), 1/2 CUP (120ML), 1/3 CUP (80ML) AND 1/4 CUP (60ML)
style_designatorUNIVERSAL JOINT
surface_treatmentOXIDE OVERALL
drive_surface_size0.500 INCHES NOMINAL SINGLE END IN
flexible_extensionNOT INCLUDED
flow_control_valveNOT INCLUDED
NSN3110-00-100-3627
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4-7-119 · Verbatim ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.8750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STEEP ANGLE
•
CONE WIDTH: 1.0594 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.8750 INCHES NOMINAL IN
STYLE DESIGNATORSTEEP ANGLE
CONE WIDTH1.0594 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
11168Interchangeable
interchangeable cross-reference
interchangeable
S637471Interchangeable
interchangeable cross-reference
interchangeable
140316Interchangeable
interchangeable cross-reference
interchangeable
DS2709Interchangeable
interchangeable cross-reference
interchangeable
SL5276PC13Interchangeable
interchangeable cross-reference
interchangeable
778PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4-7-119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-7-119?
4-7-119 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Verbatim.
What parts can replace 4-7-119?
There are 26 known substitutes for 4-7-119: 11168, S637471, 140316 and 23 more. Substitute compatibility should be verified for your specific system.
Is 4-7-119 still available?
4-7-119 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-7-119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026