PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4-4500
4-4500 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- UAE analogue adapter cable<br>- Connection cable between splitter and a lot of DSL modems<br>- Also usable within a structured cabling of buildings. Key specifications include width: 0.140 INCHES NOMINAL IN, tip_type: FLAT TIP, base_style: G4 NONE, bulb_style: E (ELIPTICAL), end_thickness: 0.025 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-107-1011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-4500
NSN: 5330-00-107-1011
FSC: 5330
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
width0.140 INCHES NOMINAL IN
tip_typeFLAT TIP
base_styleG4 NONE
bulb_styleE (ELIPTICAL)
end_thickness0.025 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
voltage_rating12.000 VOLTS NOMINAL
wattage_rating12.000 WATTS
bulb_designatorT-2 1/4
burning_positionBASE DOWN TO HORIZONTAL
drive_shank_typeHEXAGON
special_featuresORGANIZES, PROTECTS, AND TRANSPORTS DRESSINGS
NSN5330-00-107-1011
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4-4500 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: VERTICAL
•
ACCOMMODATED SHAFT DIAMETER: 4.500 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 5.756 INCHES NOMINAL IN
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 5.751 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEVERTICAL
ACCOMMODATED SHAFT DIAMETER4.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER SEALING ELEMENT
OUTSIDE DIAMETER5.756 INCHES NOMINAL IN
SEAL WIDTH0.438 INCHES NOMINAL IN
HOUSING BORE DIAMETER5.751 INCHES NOMINAL IN
ATTACHMENT METHODCEMENTED
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
450-69Interchangeable
interchangeable cross-reference
interchangeable
DE61169Interchangeable
interchangeable cross-reference
interchangeable
DF29Interchangeable
interchangeable cross-reference
interchangeable
44500Interchangeable
interchangeable cross-reference
interchangeable
1404320Interchangeable
interchangeable cross-reference
interchangeable
1KB18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4-4500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-4500?
4-4500 is a BEARING,WASHER,THRUST manufactured by Hama.
What parts can replace 4-4500?
There are 9 known substitutes for 4-4500: 450-69, DE61169, DF29 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4-4500?
4-4500 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-107-1011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-4500

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026