PartsTable
Technical Data Sheet
Download PDF

4-40X5-16 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4-40X5-16: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.078 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.203 INCHES NOMINAL IN, thread_length: 0.312 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-207-3270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-40X5-16
NSN: 5305-00-207-3270
NIINs: 002073270, 007225025, 008771084
FSC: 5305 — Screws
CAGE: 99971 — LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS (USA)
SPECIFICATIONS
head_styleROUND
head_height0.078 INCHES NOMINAL IN
thread_class2A A
head_diameter0.203 INCHES NOMINAL IN
thread_length0.312 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.344 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch40
NSN5305-00-207-3270
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4-40X5-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.078 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.112 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.312 INCHES NOMINAL IN
•
THREAD LENGTH: 0.312 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.078 INCHES NOMINAL IN
HEAD HEIGHT0.112 INCHES NOMINAL IN
FASTENER LENGTH0.312 INCHES NOMINAL IN
THREAD LENGTH0.312 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 2
8200468Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-86EReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 4-40X5-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-40X5-16?
4-40X5-16 is a SCREW,MACHINE.
What parts can replace 4-40X5-16?
There are 2 known substitutes for 4-40X5-16: 8200468, FF-S-86E. Substitute compatibility should be verified for your specific system.
What is the NSN for 4-40X5-16?
4-40X5-16 is cataloged in the U.S. Government catalog under NSN 5305-00-207-3270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-40X5-16