PartsTable
Technical Data Sheet
Download PDF

4-1750-F — VALVE,VENT-CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

4-1750-F: VALVE,VENT-CHECK.

The VALVE,VENT-CHECK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, connection_type: FLANGE FIRST END, flow_control_device: BALL, valve_operation_method: AUTOMATIC, end_item_identification: FFG38, part_name_assigned_by_controlling_agency: (INAVY) FLAME ARRESTOR/VENT CHECK. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-434-3376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-1750-F
NSN: 4820-01-434-3376
NIINs: 014343376, 015526360
FSC: 4820 — Valves, Nonpowered
CAGE: 79128 — ROBERT H WAGER CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
connection_typeFLANGE FIRST END
flow_control_deviceBALL
valve_operation_methodAUTOMATIC
end_item_identificationFFG38
part_name_assigned_by_controlling_agency(INAVY) FLAME ARRESTOR/VENT CHECK
NSN4820-01-434-3376
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 4-1750-F · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: BALL
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
FLANGE FACE DESIGN: PLAIN ALL ENDS
•
BOLT CIRCLE NOMINAL DIAMETER: 7.500 INCHES ALL ENDS IN
•
MOUNTING POSITION: VERTICAL
•
CONNECTION TYPE: FLANGE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
•
BOLT HOLE NOMINAL DIAMETER: 0.625 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEBALL
FLANGE SHAPEROUND WITH HOLES ALL ENDS
FLANGE FACE DESIGNPLAIN ALL ENDS
BOLT CIRCLE NOMINAL DIAMETER7.500 INCHES ALL ENDS IN
MOUNTING POSITIONVERTICAL
CONNECTION TYPEFLANGE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
BOLT HOLE NOMINAL DIAMETER0.625 INCHES ALL ENDS IN
VALVE SIZE4.000 INCHES IN
NOMINAL OUTSIDE DIAMETER9.000 INCHES ALL ENDS IN
SUBSTITUTES & CROSS-REFERENCES 1
1750Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4-1750-F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-1750-F?
4-1750-F is a VALVE,VENT-CHECK.
What parts can replace 4-1750-F?
There is 1 known substitute for 4-1750-F: 1750. Substitute compatibility should be verified for your specific system.
What is the NSN for 4-1750-F?
4-1750-F is cataloged in the U.S. Government catalog under NSN 4820-01-434-3376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-1750-F

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.