PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4-10369
4-10369 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, corner_shape: SQUARE LEFT FLANGE BODY CORNER, flange_width: 0.0240 INCHES MINIMUM AND 0.0260 INCHES MAXIMUM IN, overall_length: 0.0860 INCHES MINIMUM AND 0.0910 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES OVERALL, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-274-8074, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-10369
NSN: 5306-00-274-8074
FSC: 5306
CAGE: 15879 — GENERAL EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
corner_shapeSQUARE LEFT FLANGE BODY CORNER
flange_width0.0240 INCHES MINIMUM AND 0.0260 INCHES MAXIMUM IN
overall_length0.0860 INCHES MINIMUM AND 0.0910 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES OVERALL
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentPASSIVATE OVERALL
body_inside_diameter0.0870 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
body_outside_diameter0.1875 INCHES NOMINAL IN
flange_outside_diameter0.3500 INCHES NOMINAL IN
material_document_and_classificationQQ-S-764,TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5306-00-274-8074
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4-10369 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD DIAMETER: 1.016 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN
•
NECK WIDTH: 0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
FASTENER LENGTH2.500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER1.016 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN
NECK WIDTH0.625 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NECK LENGTH0.418 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
MS39040-3Interchangeable
interchangeable cross-reference
interchangeable
MILH55053Interchangeable
interchangeable cross-reference
interchangeable
AInterchangeable
interchangeable cross-reference
interchangeable
PF7Interchangeable
interchangeable cross-reference
interchangeable
8130Interchangeable
interchangeable cross-reference
interchangeable
MS39030-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4-10369?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-10369?
4-10369 is a BEARING,SLEEVE.
What parts can replace 4-10369?
There are 12 known substitutes for 4-10369: MS39040-3, MILH55053, A and 9 more. Substitute compatibility should be verified for your specific system.
Is 4-10369 still available?
4-10369 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-10369

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026