PartsTable
Technical Data Sheet
Download PDF

4 X 10 MDK — PIN,SPRING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4 X 10 MDK: PIN,SPRING.

The PIN,SPRING is a the manufacturer industrial component. Key specifications include diameter: 3.9 MILLIMETERS NOMINAL3.9 MILLIMETERS NOMINAL MM, overall_length: 10.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM10.5 MILLIMETERS MAXIMUM MM, style_designator: COILEDCOILED, expanded_diameter: 4.2 MILLIMETERS MINIMUM AND 4.2 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM4.4 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-361-1429, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4 X 10 MDK
NSN: 5315-01-361-1429
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 00287 — SPIROL INTERNATIONAL CORPORATION (USA)
SPECIFICATIONS
diameter3.9 MILLIMETERS NOMINAL3.9 MILLIMETERS NOMINAL MM
overall_length10.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM10.5 MILLIMETERS MAXIMUM MM
style_designatorCOILEDCOILED
expanded_diameter4.2 MILLIMETERS MINIMUM AND 4.2 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM4.4 MILLIMETERS MAXIMUM MM
NSN5315-01-361-1429
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4 X 10 MDK · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXPANDED DIAMETER: 4.2 MILLIMETERS MINIMUM AND 4.2 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM4.4 MILLIMETERS MAXIMUM MM
•
STYLE DESIGNATOR: COILEDCOILED
•
DIAMETER: 3.9 MILLIMETERS NOMINAL3.9 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
EXPANDED DIAMETER4.2 MILLIMETERS MINIMUM AND 4.2 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM4.4 MILLIMETERS MAXIMUM MM
STYLE DESIGNATORCOILEDCOILED
DIAMETER3.9 MILLIMETERS NOMINAL3.9 MILLIMETERS NOMINAL MM
OVERALL LENGTH10.0 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MINIMUM AND 10.5 MILLIMETERS MAXIMUM10.5 MILLIMETERS MAXIMUM MM
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
421-4-25274-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4 X 10 MDK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4 X 10 MDK?
4 X 10 MDK is a PIN,SPRING.
What parts can replace 4 X 10 MDK?
There is 1 known substitute for 4 X 10 MDK: 421-4-25274-000. Substitute compatibility should be verified for your specific system.
What is the NSN for 4 X 10 MDK?
4 X 10 MDK is cataloged in the U.S. Government catalog under NSN 5315-01-361-1429. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4 X 10 MDK