PartsTable
Technical Data Sheet
PartsTable / MRO / 3Z
3Z ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.156 INCHES MAXIMUM IN, body_diameter: 0.365 INCHES MAXIMUM IN, hole_diameter: 0.344 INCHES NOMINAL IN, overall_height: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-227-4886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3Z
NSN: 5310-00-227-4886
FSC: 5310
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.156 INCHES MAXIMUM IN
body_diameter0.365 INCHES MAXIMUM IN
hole_diameter0.344 INCHES NOMINAL IN
overall_height0.125 INCHES NOMINAL IN
terminal_length1.250 INCHES MINIMUM IN
outside_diameter0.926 INCHES NOMINAL IN
style_designatorSPRING TENSION
material_thickness0.010 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-30.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
NSN5310-00-227-4886
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3Z · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.926 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1070 OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPRING TENSION
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL HEIGHT0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER0.926 INCHES NOMINAL IN
MATERIALSTEEL COMP 1070 OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL IN
STYLE DESIGNATORSPRING TENSION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
3417-8511-1623Interchangeable
interchangeable cross-reference
interchangeable
P2-2Interchangeable
interchangeable cross-reference
interchangeable
3ZInterchangeable
interchangeable cross-reference
interchangeable
HY520Interchangeable
interchangeable cross-reference
interchangeable
563CY5SBA160AC10Interchangeable
interchangeable cross-reference
interchangeable
C069B250F103MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3Z?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3Z?
3Z is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3Z?
There are 8 known substitutes for 3Z: 3417-8511-1623, P2-2, 3Z and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3Z?
3Z is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-227-4886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3Z

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026