PartsTable
Technical Data Sheet
Download PDF

3WA2222 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3WA2222: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 OVERALL, head_style: HEXAGON, head_height: 0.281 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.625 INCHES MINIMUM IN, fastener_length: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-350-2930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3WA2222
NSN: 5306-00-350-2930
FSC: 5306 — Bolts
CAGE: 62265 — VOLVO TRUCKS NORTH AMERICA, INC. DBA (FOREIGN PARENT IS VOLVO LASTVAGNAR AB, GOTEBORG, SWEDEN.) (USA)
SPECIFICATIONS
materialSTEEL COMP 4037 OVERALL
head_styleHEXAGON
head_height0.281 INCHES NOMINAL IN
thread_class3A A
thread_length0.625 INCHES MINIMUM IN
fastener_length1.250 INCHES NOMINAL IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.562 INCHES NOMINAL IN
nominal_thread_diameter0.375 INCHES IN
minimum_tensile_strength124000 POUNDS PER SQUARE INCH LBS
NSN5306-00-350-2930
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3WA2222 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.281 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES MINIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.125 INCHES NOMINAL FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 4037 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.281 INCHES NOMINAL IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES MINIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.125 INCHES NOMINAL FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 4037 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 2
380002Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
N36251AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3WA2222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3WA2222?
3WA2222 is a BOLT,MACHINE.
What parts can replace 3WA2222?
There are 2 known substitutes for 3WA2222: 380002, N36251A. Substitute compatibility should be verified for your specific system.
What is the NSN for 3WA2222?
3WA2222 is cataloged in the U.S. Government catalog under NSN 5306-00-350-2930. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3WA2222