PartsTable
Technical Data Sheet
Download PDF

3TWL37-46U — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3TWL37-46U: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OUTER RING, bore_diameter: 2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.2800 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, outer_ring_width: 0.2500 INCHES NOMINAL IN, special_features: FRACTURED OUTER RING W/2 RETAINING RINGS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-012-3897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3TWL37-46U
NSN: 3110-00-012-3897
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OUTER RING
bore_diameter2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN
load_directionRADIAL
shield_quantity2
inner_ring_width0.2800 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2500 INCHES NOMINAL IN
special_featuresFRACTURED OUTER RING W/2 RETAINING RINGS
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
overall_outside_diameter2.8746 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-012-3897
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3TWL37-46U · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.2500 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 2.8746 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
BORE DIAMETER: 2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OUTER RING
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.2500 INCHES NOMINAL IN
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER2.8746 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SPECIAL FEATURESFRACTURED OUTER RING W/2 RETAINING RINGS
BORE DIAMETER2.3122 INCHES MINIMUM AND 2.3126 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OUTER RING
MATERIALSTEEL CORROSION RESISTING INNER RING
MATERIALSTEEL CORROSION RESISTING BALL
SUBSTITUTES & CROSS-REFERENCES 1
64000-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3TWL37-46U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3TWL37-46U?
3TWL37-46U is a BEARING,BALL,AIRFRAME.
What parts can replace 3TWL37-46U?
There is 1 known substitute for 3TWL37-46U: 64000-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 3TWL37-46U?
3TWL37-46U is cataloged in the U.S. Government catalog under NSN 3110-00-012-3897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3TWL37-46U