PartsTable
Technical Data Sheet
Download PDF

3TKR29-36P — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3TKR29-36P: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE SEPARATOR SLUG, bore_shape: STRAIGHT, bore_diameter: 1.8122 INCHES MINIMUM AND 1.8128 INCHES MAXIMUM IN, overall_width: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-220-6577, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3TKR29-36P
NSN: 3110-01-220-6577
NIINs: 012206577, 012234059
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE SEPARATOR SLUG
bore_shapeSTRAIGHT
bore_diameter1.8122 INCHES MINIMUM AND 1.8128 INCHES MAXIMUM IN
overall_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.2500 INCHES NOMINAL IN
outer_ring_width0.2500 INCHES NOMINAL IN
style_designatorSINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE
lubrication_materialOIL LUBRICATING
overall_outside_diameter2.2494 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-01-220-6577
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3TKR29-36P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 2.2494 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALOIL LUBRICATING
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.2494 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
BORE DIAMETER1.8122 INCHES MINIMUM AND 1.8128 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C INNER RING
SUBSTITUTES & CROSS-REFERENCES 2
AJ-9800-66-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
S2936MC3P515L02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3TKR29-36P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3TKR29-36P?
3TKR29-36P is a BEARING,BALL,ANNULAR.
What parts can replace 3TKR29-36P?
There are 2 known substitutes for 3TKR29-36P: AJ-9800-66-1, S2936MC3P515L02. Substitute compatibility should be verified for your specific system.
What is the NSN for 3TKR29-36P?
3TKR29-36P is cataloged in the U.S. Government catalog under NSN 3110-01-220-6577. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3TKR29-36P