PartsTable
Technical Data Sheet
Download PDF

3TCS6-10P — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3TCS6-10P: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN, overall_width: 0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-994-2004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3TCS6-10P
NSN: 3110-00-994-2004
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN
overall_width0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresINNER AND OUTER RING RADIAL RUNOUT 0.0004 IN.; FRACTURED OUTER RING WITH TWO STAINLESS HOLDING RINGS ON OD OF OUTER RING IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
overall_outside_diameter0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-994-2004
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3TCS6-10P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1512 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESINNER AND OUTER RING RADIAL RUNOUT 0.0004 IN.; FRACTURED OUTER RING WITH TWO STAINLESS HOLDING RINGS ON OD OF OUTER RING IN
SUBSTITUTES & CROSS-REFERENCES 1
1072409Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3TCS6-10P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3TCS6-10P?
3TCS6-10P is a BEARING,BALL,ANNULAR.
What parts can replace 3TCS6-10P?
There is 1 known substitute for 3TCS6-10P: 1072409. Substitute compatibility should be verified for your specific system.
What is the NSN for 3TCS6-10P?
3TCS6-10P is cataloged in the U.S. Government catalog under NSN 3110-00-994-2004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3TCS6-10P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.