PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3TAWR4-10-65
3TAWR4-10-65 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.3920 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING, overall_outside_diameter: 0.6250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-947-0079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3TAWR4-10-65
NSN: 3110-00-947-0079
FSC: 3110
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.3920 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity1
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter0.6250 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.7
NSN3110-00-947-0079
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3TAWR4-10-65 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
RETAINER FABRICATION METHOD: MACHINED
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.7
RETAINER FABRICATION METHODMACHINED
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
SHIELD QUANTITY1
OVERALL WIDTH0.3920 INCHES NOMINAL IN
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
LOAD DIRECTIONANGULAR
BORE DIAMETER0.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
24MM2CInterchangeable
interchangeable cross-reference
interchangeable
4226Interchangeable
interchangeable cross-reference
interchangeable
7793BKInterchangeable
Knife,diver's
interchangeable
AMR-1KInterchangeable
Knife,diver's
interchangeable
5793276 FIND 21Interchangeable
Knife,diver's
interchangeable
SM-C-283179Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3TAWR4-10-65?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3TAWR4-10-65?
3TAWR4-10-65 is a BEARING,BALL,DUPLEX.
What parts can replace 3TAWR4-10-65?
There are 20 known substitutes for 3TAWR4-10-65: 24MM2C, 4226, 7793BK and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3TAWR4-10-65?
3TAWR4-10-65 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-947-0079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3TAWR4-10-65

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026