3TAS6-16P — BEARING,BALL,ANNULAR

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

3TAS6-16P: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.1510 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-238-6993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3TAS6-16P

NSN: 3110-00-238-6993
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)

SPECIFICATIONS

material	STEEL COMP 440C INNER RING
bore_shape	STRAIGHT
bore_diameter	0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN
contact_angle	25.0 DEGREES MAXIMUM
overall_width	0.1510 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM IN
load_direction	ANGULAR
surface_finish	GROUND
style_designator	COUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance	0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_material	OIL
overall_outside_diameter	0.6246 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
retainer_fabrication_method	PRESSED
NSN	3110-00-238-6993

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: PRESSED

•

LUBRICATION MATERIAL: OIL

•

INTERNAL CLEARANCE: 0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE RETAINER

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	PRESSED
LUBRICATION MATERIAL	OIL
INTERNAL CLEARANCE	0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISH	GROUND
STYLE DESIGNATOR	COUNTERBORED OUTER RING, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING
OVERALL WIDTH	0.1510 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

40527Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 3TAS6-16P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3TAS6-16P?

3TAS6-16P is a BEARING,BALL,ANNULAR.

What parts can replace 3TAS6-16P?

There is 1 known substitute for 3TAS6-16P: 40527. Substitute compatibility should be verified for your specific system.

What is the NSN for 3TAS6-16P?

3TAS6-16P is cataloged in the U.S. Government catalog under NSN 3110-00-238-6993. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3TAS6-16P — BEARING,BALL,ANNULAR

Request a Quote — 3TAS6-16P