PartsTable
Technical Data Sheet
Download PDF

3TAR17-24-99 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3TAR17-24-99: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OUTER RING, bore_diameter: 1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN, overall_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-251-7322, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3TAR17-24-99
NSN: 3110-00-251-7322
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OUTER RING
bore_diameter1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
overall_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
bearing_preload_rating200.0 POUNDS NOMINAL LBS
overall_outside_diameter1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.3
NSN3110-00-251-7322
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3TAR17-24-99 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
BEARING PRELOAD RATING: 200.0 POUNDS NOMINAL LBS
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
OVERALL OUTSIDE DIAMETER: 1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
BEARING PRELOAD RATING200.0 POUNDS NOMINAL LBS
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
OVERALL WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.4996 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.3
BORE DIAMETER1.0623 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OUTER RING
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
203-020-0001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3TAR17-24-99?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3TAR17-24-99?
3TAR17-24-99 is a BEARING,BALL,DUPLEX.
What parts can replace 3TAR17-24-99?
There is 1 known substitute for 3TAR17-24-99: 203-020-0001. Substitute compatibility should be verified for your specific system.
What is the NSN for 3TAR17-24-99?
3TAR17-24-99 is cataloged in the U.S. Government catalog under NSN 3110-00-251-7322. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3TAR17-24-99