PartsTable
Technical Data Sheet
Download PDF

3P5004-181 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3P5004-181: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_style: CORNER RADIUS, first_leg_width: 1.919 INCHES MINIMUM AND 1.981 INCHES MAXIMUM IN, first_leg_length: 0.709 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN, second_leg_style: END RADIUS AND TAPERED, style_designator: DOUBLE ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-075-4903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3P5004-181
NSN: 5340-00-075-4903
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL
first_leg_styleCORNER RADIUS
first_leg_width1.919 INCHES MINIMUM AND 1.981 INCHES MAXIMUM IN
first_leg_length0.709 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
second_leg_styleEND RADIUS AND TAPERED
style_designatorDOUBLE ANGLE
second_leg_length0.709 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
surface_treatmentCADMIUM
first_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
second_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
second_leg_end_radius0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
first_leg_corner_radius0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5340-00-075-4903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3P5004-181 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
CENTER SECTION THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.700 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
CENTER SECTION THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.700 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
SECOND LEG LENGTH0.709 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3P50004-181Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 3P5004-181?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3P5004-181?
3P5004-181 is a BRACKET,DOUBLE ANGLE.
What parts can replace 3P5004-181?
There is 1 known substitute for 3P5004-181: 3P50004-181. Substitute compatibility should be verified for your specific system.
What is the NSN for 3P5004-181?
3P5004-181 is cataloged in the U.S. Government catalog under NSN 5340-00-075-4903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3P5004-181

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.