PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3N196PC305
3N196PC305 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,HOLLOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1015 OVERALL, first_end_style: CHAMFERED, inside_diameter: 0.094 INCHES NOMINAL IN, pin_overall_length: 0.500 INCHES NOMINAL IN, pin_overall_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-664-3392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3N196PC305
NSN: 5315-00-664-3392
FSC: 5315
CAGE: 54370 — ALFA LAVAL INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1015 OVERALL
first_end_styleCHAMFERED
inside_diameter0.094 INCHES NOMINAL IN
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-664-3392
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3N196PC305 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
INSIDE DIAMETER: 0.094 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OVERALL
•
PIN OVERALL DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
INSIDE DIAMETER0.094 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OVERALL
PIN OVERALL DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
A-A-2577Interchangeable
interchangeable cross-reference
interchangeable
UUC806Interchangeable
interchangeable cross-reference
interchangeable
1498Interchangeable
interchangeable cross-reference
interchangeable
DL1S8700-976226PH45KEB1498Interchangeable
interchangeable cross-reference
interchangeable
E3535PC12Interchangeable
interchangeable cross-reference
interchangeable
DL1S8700-976226PC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3N196PC305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3N196PC305?
3N196PC305 is a PIN,HOLLOW.
What parts can replace 3N196PC305?
There are 26 known substitutes for 3N196PC305: A-A-2577, UUC806, 1498 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3N196PC305?
3N196PC305 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-664-3392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3N196PC305

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026