PartsTable
Technical Data Sheet
Download PDF

3MM9106WIDUL — RADAR SET,SEMITRAILER MOUNTED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3MM9106WIDUL: RADAR SET,SEMITRAILER MOUNTED.

The RADAR SET,SEMITRAILER MOUNTED is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 INNER RACE, bore_diameter: 1.1811 INCHES NOMINAL IN, contact_angle: 25.0 DEGREES NOMINAL, overall_width: 1.0036 INCHES MINIMUM AND 1.0236 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-442-6698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3MM9106WIDUL
NSN: 3110-01-442-6698
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 INNER RACE
bore_diameter1.1811 INCHES NOMINAL IN
contact_angle25.0 DEGREES NOMINAL
overall_width1.0036 INCHES MINIMUM AND 1.0236 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING
overall_outside_diameter2.1654 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.7
NSN3110-01-442-6698
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3MM9106WIDUL · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING
•
OVERALL OUTSIDE DIAMETER: 2.1654 INCHES NOMINAL IN
•
CONTACT ANGLE: 25.0 DEGREES NOMINAL
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
BORE DIAMETER: 1.1811 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL WIDTH1.0036 INCHES MINIMUM AND 1.0236 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.1654 INCHES NOMINAL IN
CONTACT ANGLE25.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.7
BORE DIAMETER1.1811 INCHES NOMINAL IN
MATERIALSTEEL COMP E52100 BALL
MATERIALPLASTIC POLYAMIDE NYLON RETAINER
SUBSTITUTES & CROSS-REFERENCES 1
177213Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3MM9106WIDUL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3MM9106WIDUL?
3MM9106WIDUL is a RADAR SET,SEMITRAILER MOUNTED.
What parts can replace 3MM9106WIDUL?
There is 1 known substitute for 3MM9106WIDUL: 177213. Substitute compatibility should be verified for your specific system.
What is the NSN for 3MM9106WIDUL?
3MM9106WIDUL is cataloged in the U.S. Government catalog under NSN 3110-01-442-6698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3MM9106WIDUL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.