PartsTable
Technical Data Sheet
Download PDF

3MFR335CFA6-5 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3MFR335CFA6-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_length: 0.531 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.843 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-079-1675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3MFR335CFA6-5
NSN: 5305-00-079-1675
FSC: 5305 — Screws
CAGE: 77545 — REED AND PRINCE MFG CO (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.531 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.843 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentPRIMER AND CADMIUM
NSN5305-00-079-1675
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3MFR335CFA6-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PRIMER AND CADMIUM
•
FASTENER LENGTH: 0.843 INCHES NOMINAL IN
•
THREAD LENGTH: 0.531 INCHES MINIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPRIMER AND CADMIUM
FASTENER LENGTH0.843 INCHES NOMINAL IN
THREAD LENGTH0.531 INCHES MINIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE II
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
3MA335CFA6-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3MFR335CFA6-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3MFR335CFA6-5?
3MFR335CFA6-5 is a SCREW,MACHINE.
What parts can replace 3MFR335CFA6-5?
There is 1 known substitute for 3MFR335CFA6-5: 3MA335CFA6-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 3MFR335CFA6-5?
3MFR335CFA6-5 is cataloged in the U.S. Government catalog under NSN 5305-00-079-1675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3MFR335CFA6-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.