PartsTable
Technical Data Sheet
Download PDF

3M927-9DL34 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M927-9DL34: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN, head_diameter: 0.766 INCHES MINIMUM AND 0.838 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-220-0201, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M927-9DL34
NSN: 5305-01-220-0201
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN
head_diameter0.766 INCHES MINIMUM AND 0.838 INCHES MAXIMUM IN
thread_length0.881 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
fastener_length3.016 INCHES MINIMUM AND 3.046 INCHES MAXIMUM IN
special_featuresTHREADS CETYL ALCOHOL LUBRICATED
thread_directionRIGHT-HAND
countersink_angle101.0 DEGREES NOMINAL
surface_treatmentALUMINUM AND CHROMATE OVERALL
NSN5305-01-220-0201
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M927-9DL34 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 3.016 INCHES MINIMUM AND 3.046 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.881 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 23-112,FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.562 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH3.016 INCHES MINIMUM AND 3.046 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.881 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATION23-112,FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.562 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH2.115 INCHES MINIMUM AND 2.135 INCHES MAXIMUM IN
GRIP DIAMETER0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 4
WC4068-9D-34Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3M926-9DL34Reference document
Same NSN cross-reference
Reference document — Secondary reference
11883-9DL34Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4068-9D34AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3M927-9DL34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M927-9DL34?
3M927-9DL34 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M927-9DL34?
There are 4 known substitutes for 3M927-9DL34: WC4068-9D-34, 3M926-9DL34, 11883-9DL34 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M927-9DL34?
3M927-9DL34 is cataloged in the U.S. Government catalog under NSN 5305-01-220-0201. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M927-9DL34

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.