PartsTable
Technical Data Sheet
Download PDF

3M927-4L32 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M927-4L32: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 2.000 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.249 INCHES NOMINAL IN, head_diameter: 0.389 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-579-5298, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M927-4L32
NSN: 5305-01-579-5298
FSC: 5305 — Screws
CAGE: 58998 — FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleFLAT COUNTERSUNK
grip_length2.000 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.249 INCHES NOMINAL IN
head_diameter0.389 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
thread_length0.469 INCHES NOMINAL IN
fastener_length2.469 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleHIGH-TORQUE
end_item_identificationF-15 AIRCRAFT
NSN5305-01-579-5298
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M927-4L32 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.469 INCHES NOMINAL IN
•
THREAD LENGTH: 0.469 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 2.000 INCHES NOMINAL IN
•
GRIP DIAMETER: 0.249 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH2.469 INCHES NOMINAL IN
THREAD LENGTH0.469 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH2.000 INCHES NOMINAL IN
GRIP DIAMETER0.249 INCHES NOMINAL IN
INTERNAL DRIVE STYLEHIGH-TORQUE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
HT4069-4-32ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M927-4L32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M927-4L32?
3M927-4L32 is a SCREW,CLOSE TOLERANCE.
What parts can replace 3M927-4L32?
There is 1 known substitute for 3M927-4L32: HT4069-4-32A. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M927-4L32?
3M927-4L32 is cataloged in the U.S. Government catalog under NSN 5305-01-579-5298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M927-4L32