PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3M892-12D36
3M892-12D36 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: HEXAGON, grip_length: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN, head_height: 0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-130-9004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M892-12D36
NSN: 5306-01-130-9004
FSC: 5306
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
head_styleHEXAGON
grip_length2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
head_height0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN
thread_length0.552 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES GRIP
fastener_length2.812 INCHES MINIMUM AND 2.832 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN
nominal_thread_diameter0.750 INCHES IN
NSN5306-01-130-9004
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M892-12D36 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 2.812 INCHES MINIMUM AND 2.832 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NAS621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.684 INCHES MINIMUM AND 2.714 INCHES MAXIMUM ALL HOLES IN
•
WIDTH BETWEEN FLATS: 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF)
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH2.812 INCHES MINIMUM AND 2.832 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONNAS621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.684 INCHES MINIMUM AND 2.714 INCHES MAXIMUM ALL HOLES IN
WIDTH BETWEEN FLATS1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN
SURFACE FINISH63.0 MICROINCHES GRIP
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
SURFACE FINISH6.0 MICROINCHES THREADS
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
544-2102-080Interchangeable
interchangeable cross-reference
interchangeable
50376-1-185Interchangeable
interchangeable cross-reference
interchangeable
5-7-3STInterchangeable
interchangeable cross-reference
interchangeable
3M892-14H34Interchangeable
interchangeable cross-reference
interchangeable
VS3617Interchangeable
interchangeable cross-reference
interchangeable
11105-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3M892-12D36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M892-12D36?
3M892-12D36 is a BOLT,CLOSE TOLERANCE.
What parts can replace 3M892-12D36?
There are 9 known substitutes for 3M892-12D36: 544-2102-080, 50376-1-185, 5-7-3ST and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M892-12D36?
3M892-12D36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-130-9004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M892-12D36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026