PartsTable
Technical Data Sheet
Download PDF

3M47-6-14 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3M47-6-14: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.114 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, thread_length: 0.641 INCHES MINIMUM IN, screw_material: STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-764-3036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M47-6-14
NSN: 5305-00-764-3036
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.114 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
thread_length0.641 INCHES MINIMUM IN
screw_materialSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740
fastener_length1.516 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
features_providedO RING
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.375 INCHES IN
NSN5305-00-764-3036
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3M47-6-14 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.114 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 1.516 INCHES NOMINAL IN
•
THREAD LENGTH: 0.641 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
FEATURES PROVIDED: O RING
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.114 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH1.516 INCHES NOMINAL IN
THREAD LENGTH0.641 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
FEATURES PROVIDEDO RING
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
HT6UA6-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT403A6-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
54266-6-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3M47-6-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M47-6-14?
3M47-6-14 is a SCREW,MACHINE.
What parts can replace 3M47-6-14?
There are 3 known substitutes for 3M47-6-14: HT6UA6-14, HT403A6-14, 54266-6-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M47-6-14?
3M47-6-14 is cataloged in the U.S. Government catalog under NSN 5305-00-764-3036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M47-6-14