PartsTable
Technical Data Sheet
Download PDF

3M464N9D — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3M464N9D: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 AND ALUMINUM ALLOY 7072, overall_width: 0.552 INCHES MAXIMUM IN, overall_height: 0.298 INCHES MAXIMUM IN, overall_length: 71.575 INCHES NOMINAL IN, surface_treatment: ANODIZE, material_thickness: 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-170-6607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M464N9D
NSN: 5340-01-170-6607
FSC: 5340 — Hardware, Commercial
CAGE: 27238 — BRISTOL INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 AND ALUMINUM ALLOY 7072
overall_width0.552 INCHES MAXIMUM IN
overall_height0.298 INCHES MAXIMUM IN
overall_length71.575 INCHES NOMINAL IN
surface_treatmentANODIZE
material_thickness0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
end_item_identificationW/S: FMS-AIRCRAFT, HORNET F/A-18; FUN SYSTEM, 25MM; AVIATION ORDANCE; AIRCRAFT, HORNET F/A-18 MM
material_document_and_classificationQQ-A-250/13, T6 FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers1.125 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-170-6607
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3M464N9D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/13, T6 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.298 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/13, T6 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH71.575 INCHES NOMINAL IN
OVERALL WIDTH0.552 INCHES MAXIMUM IN
MATERIAL THICKNESS0.034 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE
END ITEM IDENTIFICATIONW/S: FMS-AIRCRAFT, HORNET F/A-18; FUN SYSTEM, 25MM; AVIATION ORDANCE; AIRCRAFT, HORNET F/A-18 MM
MATERIALALUMINUM ALLOY 7075 AND ALUMINUM ALLOY 7072
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10163929Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3M464N9D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M464N9D?
3M464N9D is a RETAINER,NUT AND BOLT.
What parts can replace 3M464N9D?
There is 1 known substitute for 3M464N9D: 10163929. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M464N9D?
3M464N9D is cataloged in the U.S. Government catalog under NSN 5340-01-170-6607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M464N9D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.