The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.298 INCHES MAXIMUM IN, first_leg_length: 72.0 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-623-0243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
3M464C24DP
NSN:5340-01-623-0243 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
0.298 INCHES MAXIMUM IN
first_leg_length
72.0 INCHES NOMINAL IN
second_leg_angle
90.0 DEGREES NOMINAL
special_features
BOTH LEGS HAVE SLIDES THAT ARE 0.08/0.09 WIDE BY 0.215/0.225 LONG ALONG THE LENGTH;HOLES ARE PLACED IN BRACKET TO ACCOMODATE NUTS;CENTER TO CENTER MEASUREMENT OF NUT HOLES IS 3.00 INCHES IN
style_designator
ADJACENT ANGLES
second_leg_length
72.0 INCHES NOMINAL IN
surface_treatment
PASSIVATE AND PRIMER
first_leg_thickness
0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
center_section_width
0.552 INCHES MAXIMUM IN
NSN
5340-01-623-0243
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 PLUS TWO COATS OF MIL-PRF-23377 TY I,CLASS C1 OR C2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-STD-7179 MIL SPEC 2ND TREATMENT RESPONSE
•
SECOND LEG LENGTH: 72.0 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
CENTER SECTION WIDTH: 0.552 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS
0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
IDENTICAL
SECOND LEG ANGLE
90.0 DEGREES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-S-5002 PLUS TWO COATS OF MIL-PRF-23377 TY I,CLASS C1 OR C2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-STD-7179 MIL SPEC 2ND TREATMENT RESPONSE
SECOND LEG LENGTH
72.0 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
NO HOLE
CENTER SECTION WIDTH
0.552 INCHES MAXIMUM IN
STYLE DESIGNATOR
ADJACENT ANGLES
FIRST LEG STYLE
SQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M464C24DP?
3M464C24DP is a BRACKET,DOUBLE ANGLE.
What parts can replace 3M464C24DP?
There are 3 known substitutes for 3M464C24DP: CN170SC4-24, CH49250-4-24P, BCH464C24P. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M464C24DP?
3M464C24DP is cataloged in the U.S. Government catalog under NSN 5340-01-623-0243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.