PartsTable
Technical Data Sheet
Download PDF

3M463N8D — CHANNEL,GANG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3M463N8D: CHANNEL,GANG.

The CHANNEL,GANG is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, overall_width: 0.452 INCHES MAXIMUM IN, overall_height: 0.250 INCHES MAXIMUM IN, overall_length: 72.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-494-7262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3M463N8D
NSN: 5340-01-494-7262
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
overall_width0.452 INCHES MAXIMUM IN
overall_height0.250 INCHES MAXIMUM IN
overall_length72.000 INCHES NOMINAL IN
special_featuresNUT SPACING IS 1.000 IN NOM/INSIDE WIDTH OF CHANNEL IS 0.345 IN NOM/THICKNESS OF CHANNEL WALL IS 0.040 IN NOM/MATERIAL IS AL7075 PER QQ-A-250 IN
NSN5340-01-494-7262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3M463N8D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES MAXIMUM IN
OVERALL LENGTH72.000 INCHES NOMINAL IN
OVERALL WIDTH0.452 INCHES MAXIMUM IN
SPECIAL FEATURESNUT SPACING IS 1.000 IN NOM/INSIDE WIDTH OF CHANNEL IS 0.345 IN NOM/THICKNESS OF CHANNEL WALL IS 0.040 IN NOM/MATERIAL IS AL7075 PER QQ-A-250 IN
MATERIALALUMINUM ALLOY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
CH49686-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CN170-3-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BCH463N8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3M463N8D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3M463N8D?
3M463N8D is a CHANNEL,GANG.
What parts can replace 3M463N8D?
There are 3 known substitutes for 3M463N8D: CH49686-3-8, CN170-3-8, BCH463N8. Substitute compatibility should be verified for your specific system.
What is the NSN for 3M463N8D?
3M463N8D is cataloged in the U.S. Government catalog under NSN 5340-01-494-7262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3M463N8D